KCB stainless steel gear pump is mainly used for transmission lubricants, lubrication system in a variety of machinery and equipment is suitable for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), the temperature below 300 ℃ with oil lubrication. Stainless steel gear pumps, conveyor lubrication oil, beverages, low corrosive liquids. With low internal point liquid such as gasoline, benzene, and other copper gear can deliver. In addition to configuring the ordinary motor, this pump will be according to the needs of users configure with the specifications of explosion-proof motor. 
 ● Use 
 Can be used as a transportation fuel system pressure, fuel injection pump; in the oil system can be used as a transfer, booster pumps;, can make the oil pump to use in all industrial areas. 
 ● the scope of application 
 This series gear pump gears, shaft, pump, safety valve, shaft seal is composed. Gear heat treated to high hardness and strength, and the shaft is installed with replaceable sleeve operation. Lubrication of all parts within the pump in the pump work output media automatically reach. The pump design drain and return to the tank, minimum gear to withstand the torque force at work, so the bearing load, wear, high efficiency pump. The pump has a safety valve as overload protection, the safety valve of the total reflux exclude pressure pump rated pressure of 1.5 times, can also be adjusted according to actual needs another allows the discharge pressure within. But pay attention to the safety valve can not make long-term work of the valve may be needed in the pipeline to be installed. Stretch from the spindle outer end to the pump rotation is clockwise. Flow gear pumps, gear pumps, unloaded pump, fuel pump, the original pump, marine gear pump. Flow: 1.1m3/h-600m3/h the pressure: 0.28MPa - 2.5MPa. Mainly used for large flow of oil and oil fields, oil depots, ports, docks, ship unloading! Material: 304.316.316L stainless steel