Use 

 KCB series gear pump applies to the delivery of solid particles and fibers, non-corrosive, temperature not higher than 80 ° C, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) lubricants or nature other liquids of similar lubricant. 

 ● Applications 

 In the oil system can be used as a transmission booster pump; 
 Can be used as a transportation fuel system pressure, fuel injection pump; 
 In the hydraulic drive system used to provide hydraulic power hydraulic pump; 
 In all industrial areas may make the use of lubricating oil pump; 

 ● Features 

 This series of gear pumps gear, shaft, pump, safety valve, shaft seal is composed. Gear after heat treatment, high hardness and strength, and the shaft is installed with replaceable sleeve operation. Lubrication of all parts within the pump in the pump work output media automatically reach. 
 The pump design drain and return to the tank, minimum gear to withstand the torque force at work, so the bearing load, wear, high efficiency pump. 
 The pump has a safety valve as overload protection, the safety valve of the total reflux exclude pressure pump rated pressure of 1.5 times, can also be adjusted according to actual needs another allows the discharge pressure within. But pay attention to the safety valve can not make long-term work of the valve may be needed in the pipeline to be installed. 
 Stretch from the spindle outer end to the pump rotation is clockwise.